DIY Mid-Century Slatted Bench Project For Adding Seating Option Anywhere

Looking for a furniture piece that not only serves as the centerpiece of your decor but also whispers the elegance of mid-century charm? This DIY Mid-Century Slatted Bench guide will transport you to the nostalgic era of the 1950s with a slatted bench that would impress even George Nelson himself. Whether this bench finds a home in your foyer or becomes an understated yet chic addition to your dining table, the simplicity of this build, combined with its classic design, makes it a versatile project for both novice and experienced creators.

DIY Mid-Century Slatted Bench Project

Materials Required:

Nine 1" x 4" x 6' pine boards (Note: Eight for the seat and one for cutting)
Six 1" x 4" x 8' pine boards
Two 24" bar clamps (Four would be ideal for ease of assembly)
Liquid Nails adhesive
A standard caulk gun for the Liquid Nails
A yardstick
A square tool
100 #8 x 1.25" counter-sinking wood screws
A power drill
A power sander
Sandpaper, both 80 and 120 grit
Your choice of paint, stain, or polyurethane for finishing
A brush or rags for applying the finish

Tools and Equipment:

A power drill
A standard caulk gun
Bar clamps
A yardstick or measuring tape
A square tool
A power sander

Let's Build a Mid-Century Masterpiece:

Preparing Your Materials:

Selection and Pre-Cutting: Choose the straightest pine boards available to avoid frustrations later. Cut one of the six-foot boards along with the rest for the project's various sections. You'll need 14 pieces at 18 inches long and 16 at 14.5 inches long from your eight-foot boards.

Assembly Part 1 - Laying the Foundation:

Setting Up: Grab a six-foot board and one 14.5-inch piece. Check that the wood is square, as this will guide your entire project. Protect your work surface — things will get sticky.
Adhesive Application: Apply a bead of Liquid Nails where the two pieces meet. Use your clamps to hold them together, ensuring they're perfectly square. As the adhesive sets quickly, keep up a good work pace.

Part 2 - Building The Sides:

Attaching Vertical Supports: Glue a ¼-inch strip of Liquid Nails down the center of one of the 18-inch boards. Position it atop the 14.5-inch section flush with the six-foot board. Secure with screws for added stability.
Repetition and Precision: Repeat the previous step for the other side of the bench. Ensure all attachments are square and flush before proceeding.

Assembly Part 3 - Creating the Seat:

Layering the Slats: Continue building up the slats, applying glue, clamping, and screwing each piece in place. Remember, this will form the seat of the bench, so maintain a flush and level surface.
Conceal or Reveal: Decide whether you prefer to display the hardware. If not, for the backside, rely on clamps and adhesive alone for a clean look, with no screws visible.

Finishing Touches:

Sanding and Smoothing: Use the 80-grit sandpaper to start smoothing out the bench, refining with the 120-grit. Take care not to overdo it — the goal is smoothness, not changing the shape.
Filling and Finishing: Wipe the bench clean, then use wood filler for gaps. Once dry, complete your bench with a stain, paint, or sealant. Await drying, and your masterpiece is ready for debut!

Personalization:

Custom Accent Additions: Consider outdoor-friendly feet or felt strips for indoor floor protection. Add a signature flair with a color or stain that speaks to your decor.

Final Thoughts:

There you have it, a bench that not only resonates with timeless design but is also tailor-made by you for your home. This practical and stylish piece is now ready to add a touch of mid-century flair to your space. Whether you're a seasoned DIY enthusiast or a first-time builder, the satisfaction of creating a functional piece of furniture is unparalleled. Embrace the process, and enjoy your new, chic slatted bench.